Fertigation Solutions
Piston Operated Electrical Dosing Pump & Piston Operated Dosing Pump
	Operation in Pulse type. Dosing flow is adjustable. High chemical resistance. Easy installation. Available in different ranges(50,100,200,300,500,1000 lph).

Automatic Fertigation Systems

Any crop must receive all of the nutrients at a specific EC (electric conductivity) and pH (acidity) level.
Therefore, the fertigation must be carried out according to the Ec / pH of the irrigation water.
Another advantage of irrigation according to Ec / pH control is the ability to maintain the desired concentration of the fertilizer in the water regardless of preparation error, material chemistry construction etc.

FERTIJET(Bypass System)

This machine injects liquid fertilizers in the mainline. Since this machine injects from outside, it is called as bypass system.
It has a Ec/pH monitor & electronic venturies, which are connected to controller.
This machine can fit easily on the existing system also, with range from 1 to 4 .

This is an inline system. Water & fertilizers are mixed in the tank. The machine has Ec & pH monitors & electronic venturies. After desired mixing, the solution is pumped to the field.
Standard models available are 9, 25, 35 & 60 cubic meters / hr. at 2.5-3 bar.

Filter Backwash Controller : Filt-O-Clean®
Features and Specifications
For controlling automatic periodical backwash operation of media filters. Flush time can be set from 0 to 59 minutes in one minute increments Wait interval can be set from 1 minute to 23 hrs & 59 minutes. Facility to operate on pressure differential mode. Available in 1, 2, 3, 4, 5 & 6 station models. Higher models can be supplied on demand. .Can be supplied with optional solar power facility.

Operating with Solar Photo Voltaic (SPV) system

All DC controllers can also be operated with solar energy. In this case a solar kit consisting of Solar Photovoltaic module (panel), battery of required capacity & charge controller is essential. The scheme of connections is shown below.

Solar kit is an optional unit; but useful where AC supply is absent or not reliable. In this system, the battery supplies the required voltage to the controller & Solar panel is used to charge the battery. The system can be designed in such a way that even in absence of sunlight for almost two days, the controller will be powered with solar kit.