Features and Specifications:
-
Self cleaning suction filter.
-
Hydraulically powered spray rotor continuously displaces trash/debris away from the screen.
-
Flushing of screen using filtered water. Special provision of ¾” screen filter to avoid plugging of nozzles (optional).
-
Constructed from mild steel body and stainless steel screen. Stainless steel body can be supplied on demand.
-
Coated with more than 70 micron thick deep blue coloured epoxy powder from both inside and outside surface for protection against corrosion.
-
Low frictional loss across the filter.
-
Strong metal ribbed supported screen to avoid collapse due to suction pressure.
-
Available in standard screen size of 400 micron. Other screen size can be supplied on demand.
-
Maintains constant flow rate.
-
Helps to improve system efficiency by reducing load on the micro irrigation filters.
-
Low maintenance. Does not require frequent removal of suction pipe or cleaning of foot valve.
|
-
Minimum operating pressure for spray rotors is 1 kg/cm² (14 psi).
-
Protects pump and piping system damage and clogging due to physical impurities.
-
Available in 2½”, 3” and 4” sizes without foot valve. Please specify for Jain foot valve (plastic) or metal foot valve option while ordering.
-
Standard end connections are BSP flanged. Please specify for other end connections.
Applications:
-
Recommended to use for water source having heavy load of algae, trash, sand and other debris.
-
Best suitable for irrigation pumping lines running on open wells, reservoirs, ponds, tanks etc.
|
|
|
Technical Specifications :
| * Reference Code |
Nominal Flow Rate |
Inlet Connection, BSP Flanged |
Return inlet size |
A |
B |
C |
D |
Flange PCD |
No. of Holes |
Hole dia. |
| m³/hr |
gpm |
inch |
inch |
mm |
mm |
mm |
inch |
mm |
Nos |
mm |
| DRC25JFV |
40 |
176 |
2½" |
3/4" |
280 |
380 |
485 |
2.5" |
114.0 |
6 |
7.0 |
| DRC25MFV |
40 |
176 |
2½" |
3/4" |
280 |
380 |
485 |
2.5" |
127.0 |
4 |
17.0 |
| DRC30JFV |
50 |
220 |
3" |
3/4" |
316 |
500 |
620 |
3" |
137.0 |
8 |
7.0 |
| DRC30MFV |
50 |
220 |
3" |
3/4" |
316 |
500 |
620 |
3" |
146.05 |
4 |
17.0 |
| DRC40JFV |
80 |
352 |
4" |
3/4" |
316 |
500 |
630 |
4" |
178.0 |
8 |
9.0 |
| DRC40MFV |
80 |
352 |
4" |
3/4" |
316 |
500 |
630 |
4" |
177.8 |
8 |
17.0 |
Note: JFV – Jain Foot Valve, MFV – Metal Foot Valve |
|
Ordering Specifications:
Example:DRC30 - This code represents Rotoclean Filter with 3” BSP Flanged inlet connection without foot valve option.
Note: For ordering Rotoclean filter with metal foot valve option add suffix ‘MFV’ and ‘JFV’ for Jain foot valve option to the above ordering specification. |
|
|
|
|
Go to related products: Filters |
Click here for more details |
