Trickler Guard™ Poly

Features and Specifications:

• Manufactured from high quality engineering plastic material.

• Trickle Guard™ technology prevents low head drainage.

• Minimum operation pressure is 0.5 kg/cm² (7 psi).

• Shut off pressure 0.2 kg/cm² (3 psi).

• Prevents back flow from the polytube.

• Acts as anti-siphoning device to avoid suction of the dirt in the drippers.

• Keeps the submain always full of water. Saves pumping energy to fill up the pipeline.

• Stainless steel spring and EPDM seal ensures trickle proof sealing for long period.

• UV stabilised.

• No environmental effects.

• Resistance to most of the fertilizers and chemicals used in agriculture.

• Maximum operating pressure 6 kg/cm² (85 psi).

• Available in connection options suitable for Polytube, Jain Tough Hose, J-Turbo Line® & Drip Tape.

Applications:

• Recommended for micro irrigation system on undulating terrain to prevent low head drainage and back flow problems.

• Recommended to use in green house applications.

Performance Graph:

Note : Tested under standard test conditions.

Ordering Specifications:

Example: TGPPB16 - This code represents Trickle Guard™ - Poly with poly barbed inlet suitable for 16mm OD Polytube.