PE Pipes and PE Pipe Fittings

Jain PE Pipes and Pipe Fittings are available in a vast range, Whatever may be your application...  We have the PE Piping System. Range of pipe sizes in various Thermoplastics starts from 3mm dia. to 1000mm dia that can be installed on surface, buried, slip lined, trench less, floating and submerged. Fluids transported include, water, waste-water, compressed gases / air, odorous and corrosive gasses, chemicals and hazardous wastes / effluents. Solids conveyed include coal ash, slurries, sand and cables.

Whatever we manufacture we have aligned with conservation, Water & Energy conservation and nature protection with our products like Plastic Piping Systems, Solar Water heating Systems, Micro Irrigation Systems, Food Processing and Plastic Sheets.  This unique range of products complemented by excellent quality and services.

Jains have been in PE pipe production since 1987 and have perfected the extrusion and co-extrusion of the PE pipes with state of the art machines and down the line equipment to ensure quality and strict adherence to standards.

Jains manufacture PE pipes confirming to IS-4984, ISO-4427 and 4437, DIN - 8074 and BS - 6437 and BSNL specifications. All pipe fittings are made available for quick-fit, compression jointing, butt-welding, electro-fusion welding and Sure-Loc® jointing systems.

Jains have fully utilized capacity of 250000 MT per annum for Piping Systems out of which uPVC pipes and fittings account for 1,44,000 MT and the Balance 106000 MT is for other Thermoplastic Piping majority of which is Polyethylene Piping of different Grades of PE like PE 100, PE 80 and PE 63 .

Our unending efforts in the pursuit of excellence appropriately blended with our ongoing Research and Development efforts have earned the Company the highest R & D awards of the country and numerous other recognitions & awards for their performance in Exports and Marketing. The various Units manufacturing thermoplastic piping systems in Jain Irrigation Systems Limited have been accredited with ISO 9001 certification. We have an R & D laboratory with a vast range of routine test facilities in addition to many sophisticated equipment inthe category of state of the art technology. This laboratory is approved by DSIR i.e. Department of Scientific and Industrial Research, Ministry of Science and Technology and is also a two-time recipient of the National Award from the same Department for its R & D efforts in Industry.

We wonder if anyone else in the world has stretched plastics so much, so far and so well under one roof.

Pipes and Pipe Fitting Range includes:
PE Pipes and PE Pipe Fittings HDPE Pipes
Jain High Density Polyethylene  Pipe (HDPE) Lift and gravity water supply systems . Micro & sprinkler irrigation systems. Sewerage pumping and effluent disposal systems. Column pipes for submersible pumps.
Jain HDPE Pipes Jointing and Connections JAIN HDPE piping systems like - butt fusion, electro-fusion, which are permanent joints and detachable joints such as flanged joints, self restrained sure-loc joints, Quick-Connect® joints and compression joints
PE Hand Moulded Fittings (HMF) PE Bends (Plain Ended), Equal Tees (Plain Ended), Equal Tee with Flanged Ends, Unequal Tee with Flanged Ends (Single / Multistage), Moulded Flanges (Slip-on), Flanges with Weld Neck, Sandwich Flanges, Blind Flanges, MS Slip-on Flanges, Single / Multi Stage Reducers (Plain Ended), Pipe End (Long Neck), End Cap, Duck Foot Bend
Quick-Connect® PE Pipes & Pipe Fittings
Quick-Connect® PE Pipes Suitable for portable impact overhead and floppy sprinkler systems.Can be used for portable water supply distribution pipelines.
Quick-Connect®Joints We have perfected three joints according to the requirement of sizes. These joints are designed to withstand the tensile pull that will be acting on the joint when the pipeline is under pressure.
Quick-Connect® Fittings - Plastic Clamp Joints Used for installation of portable overhead / floppy sprinkler irrigation system.
Quick-Connect® Fittings - Single Metal Clamp Joints Manufactured from virgin HDPE material.Plated single metallic clamp facilitates fast assembling and disassembling.
Quick-Connect® Fittings - Double Metal Clamp Joints Manufactured from virgin HDPE material.Plated double metallic clamp provides all round grip on pipe to prevent leakage and snapping off.
Quick-Connect® Fittings - Metal Latch Joints Manufactured from virgin HDPE material.Plated metallic clamps designed for easy and fast installation.
Quick-Connect® Fittings - High Pressure Manufactured from virgin HDPE material.Heavy duty zinc plated clamps and lever.Lever hook to clamp on the socket and allow for high pressure joint.
HDPE Sure-Loc® Pressure Pipes
HDPE Sure-Loc® - Pressure Pipes and Fittings Natural Gas / Vaporized LPG Conveyance and Distribution.
Jain Silicoat PE OFC Ducts & Fittings
Jain PE Cable Duct Pipes Available in Orange, Blue, Green, Yellow, Red, Purple, Grey and Black colours. Other colours on demand.
Jain Micro Duct Jain Micro Ducts are available in 7mm, 10mm & 14 mm OD with different wall-thicknesses.
B-Sure PE Corrugated Pipes & FIttings
Jain Single and Double Corrugated Pipe Power cable conduit & telecom cable duct.
B-Sure PE Gas Piping Systems & Fittings
Jain Polyethylene Gas Piping Systems Natural Gas/ Vaporized LPG Conveyance and Distribution.

Visit our PE Pipe Manufacturing Plant